InterOcean logo InterOcean systems, inc.
Home Products Technical Support Customer Service Company Profile Contact Us Company News Sitemap

Model 513E Portable Mini-CTD


* Rugged, All Metal Construction of Stainless Steel & Marine Anodized Aluminum
* Accurate & Stable - Does Not Require Operator Adjustment
* Free Annual Calibration check at InterOcean's Test Lab
* Small Size & Light Weight Permit Hand Deployment
* Low Cost Allows Its Inclusion In the Tightest Budgets
* Optional Internal A/D and Windows Control/Display Software


Model 513E Mini-CTD

When precision fieldwork requires accuracy, stability and ruggedness similar to the larger CSTDs ,but portability and low cost come first, the answer is the Mini-CTD from InterOcean systems, inc. Highly valuable in oceanographic surveys, limnological studies, life science research, fisheries, water quality monitoring, offshore exploration, pollution control support and anywhere measurements of conductivity, temperature and depth (dissolved oxygen and pH optional) are needed.

The Mini-CTD is shown here with the 514C Digital Display Unit. This portable, waterproof, battery-powered unit is ideal for these applications. However, any one of InterOcean's family of deck units may be connected to the Mini-CTD as well as a unit of customer design.

With the 513E-A/D, an A/D converter is installed in the housing of the multiparameter probe and serial data is output for use with the 514PC-W Data Logging System via a four-conductor cable.

The sensors on the Portable Mini-CTD are designed to permit profiling and are similar to the type used on our higher accuracy CTDs, with years of successful performance behind them.

Calibration stability, small size and weight make the 513E Mini-CTD the ideal choice for your Oceanographic needs.


Model 514 Display Unit with Model 513E Mini-CTD


Application Examples
Water Quality Monitoring
The 513E is compact and light enough to be hand-deployed from the small boats typically used in water quality monitoring applications. Its calibration stability provides correlation confidence from one sampling period to the next without the requirement for constant recalibration. It's priced to fit in the most constrained budgets.

Academic Research

The 513E's low cost allows more units to be available for student hand-on training. It is also perfect for many coastal studies where the high accuracy of our 513D is not required. Its portability prevents tying up an expensive research vessel for many coastal studies.
Fisheries Research
The 513E provides an excellent opportunity for the investigator to quickly board a vessel to assess fishing success versus salinity, temperature and dissolved oxygen. It's portable, self-contained nature makes no logistical demands on the ship and eases the investigators ability to integrate with the fishing activity.



Specifications
  Range Precision Response
Conductivity 0.5 - 60 mS/cm +/- 0.05 mS/cm 1.4 sec.
Temperature

-5 to +45 deg. C +/- 0.02 deg. C 1.4 sec.
Depth

0-1000 m +/- 0.15% F.S. 60 msec.
Dissolved Oxygen
(Optional)

0 - 20 ppm +/- 0.1 10 sec.



513E-A/D Specifications
A/D resolution: 15 bits
Precision: 0.02 %FS
Sampling Rate: 2 Hz per full data set
Output: Serial, RS-485
Maximum Cable Length: 4000 ft
Power: +10 to +30 VDC single supply



Mechanical Specifications
Material: Hard anodized aluminum
Size: 5 inch dia. x 7 1/8 inch long
Weight: 9 lbs.
Depth: 1000 meters


Home Products Technical Support Customer Service Company Profile Contact Us Company News Sitemap

InterOcean systems, inc.
4241 Ponderosa Avenue, Suite A, San Diego, CA 92123-6501 Phone: (858) 565-8400 Fax: (858) 268-9695
email: sales@interoceansystems.com